Help with machine heads

Discussion in 'Epiphone Guitars' started by LDJ, Dec 11, 2018.

  1. LDJ

    LDJ New Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    Dec 11, 2018
    I am trying to refurbish an Epiphone Zenith that belonged to my Dad. He bought it around 1959/60. The Machine heads on it are worn out. I bought replacements, two sets of three on silver plates but the spacing of the holes on the headstock of the guitar are slightly wider than the spacing of the posts on the machine head. I had (naively) assumed the spacing would be standard. Can anyone recommend a machine head or a manufacturer that makes parts compatible with an Epiphone Zenith? Many thanks in advance.
     
  2. Biddlin

    Biddlin Well-Known Member

    Messages:
    936
    Likes Received:
    990
    Joined:
    Jan 27, 2015
    Pics of the headstock, back and front and of the oem machines would help.
    IIRC they used Waverly small button tuners on those, no?
     
    Last edited: Dec 11, 2018

Share This Page